02 / PROTECTION TECHNOLOGY
Engineered in layers.
From the nano surface layer down to the adhesive: inside a CYBRIX protection film.
- 01Enhanced nano hydrophobic layer
- 02Self-healing topcoat
- 03Aliphatic TPU substrate
- 04Acrylic pressure-sensitive adhesive
- 05Factory paint
Illustrative construction; layer order shown from the outer surface to the adhesive, not to scale. The release liner is removed during installation. Satin, matte and color films use finish-specific topcoats; IRONMIX adds a color layer. Self-healing recovery applies to minor swirl marks under heat and does not repair cuts, chips or deep scratches. Confirm details against the product technical data sheet.
One structure, four finishes
Film structure
Aliphatic TPU throughout
Every CYBRIX film is built on an Aliphatic TPU platform.
Flexible, conformable polyurethane for curves, edges and high-impact zones.
Self-healing topcoat
An elastic clear coat engineered for heat-activated recovery of minor swirl marks.
Self-healing applies to minor swirl marks under heat; it does not repair cuts, chips or deep scratches.
IRONSHIELD
Built for extreme climates
Engineered for intense UV, sustained heat, high humidity and heavy rain.
Water beads tight and sheets off fast, helping reduce water-spot formation.
Climate and hydrophobic statements describe design intent; results vary with exposure and care.
*10-Year Yellowing Promise: 10-year limited warranty including yellowing for installations registered online within 30 days. Remedy: replacement film from a new roll for the affected panels, up to one full roll per registered vehicle; labor is not included. Water spots, contamination stains, improper installation or care, and accident damage are excluded. Full terms: see the Warranty page.
Care for maximum life
Hydrophobic film sheds water fast, but mineral spots can still form if water dries on it. Dry the vehicle after washing or rain. Use pH-neutral automotive shampoo and a soft microfiber mitt; keep pressure-washer nozzles away from film edges. Top up with a PPF-compatible product such as CYBRIX Hydro Coat to keep the film easy to clean.