Protect · CC-HG
Hydro Glass
Hydrophobic Ceramic Glass Coating
High-Definition Clarity in Every Downpour
CYBRIX Hydro Glass (HG) is a hydrophobic ceramic coating developed specifically for automotive glass. It lays down a durable protective layer that helps water clear from the glass, supports a clearer view, reduces reliance on wipers at speed, and helps resist oil-film buildup. Designed for the windshield and other exterior glass, HG provides up to eight months of windshield protection, with longevity that may extend further on other glass surfaces.
50 mL Kit
$45.99per unit
Official phone: +1 (307) 346 0118
All prices are per unit. Freight, duties and taxes are calculated at checkout.
Key benefits
Clearer Wet Vision
Hydrophobic protection helps maintain a clearer view through rain and road spray.
Less Wiper Reliance
Helps cut down on wiper use as vehicle speed increases.
Oil-Film Resistance
Helps inhibit oil-film buildup that can compromise windshield clarity.
Durable Glass Layer
Builds a durable protective layer for windshields and other automotive glass.
Specifications
| Volume | 50 mL Kit |
|---|---|
| Format | Boxed kit: 50 mL coating bottle and foam applicator block |
| Application | Hand application with supplied foam applicator block |
| Dilution | Ready to use; do not dilute |
| Compatible surfaces | Automotive glass |
| Finish | Clear hydrophobic protective layer |
| Durability | Up to 8 months on windshields; may extend further on other glass |
Compatible with
For automotive windshields and other exterior glass surfaces.
Safety data sheet
Contact CYBRIX to request the safety data sheet.
Directions for use
- 01
Work in a clean, shaded, well-ventilated area on cool glass; wear suitable gloves.
- 02
Clean glass thoroughly, remove contaminants and oil film, then dry the surface completely.
- 03
Shake HG well. Apply several drops to the supplied foam applicator block.
- 04
Coat one manageable section using overlapping passes until coverage is even and continuous.
- 05
Allow the coating to flash according to ambient conditions, then level residue with a clean, lint-free towel.
- 06
Inspect clarity from multiple angles. Keep glass dry and avoid wiper use until the coating has fully set.
Pro tip
Glass preparation determines the final result. Remove bonded contamination and oil residue completely before coating.
Storage & safety
Store tightly sealed at 50–77°F (10–25°C). Keep in the original container, away from heat, frost, and direct sunlight. Keep out of reach of children; use only with appropriate ventilation. For best consistency, use remaining product promptly after opening and follow any dated label.
Always follow the product label and safety data sheet. Test on an inconspicuous area before full application.
Documents
Specification sheets are for reference. Safety Data Sheets are available on request.
Pairs with
Send us an enquiry
Tell us what you need and our team will review your enquiry.
Customer service email: info@cybrixusa.com